 |
Friction Hinges
: Defender Friction Hinge
Window Fittings » Friction Hinges
Manufacturer: Securistyle
- A high performance stay for standard casement windows
- Top Hung and Side Hung
- Slimline 15mm width available as well as Standard 18mm
- Stack heights of 13mm , 16mm and 17mm
- Full BBA approval
- Foolproof location system for reliable , accurate closure
- Easy to fit with smooth operation
- Effective weather proofing and draught - proofing
- Available in 6" to 24" top hung and 12" and 16" side hung
- Can also be made in high grade Austenitic Stainless Steel
- Restricted and Egress / Easy clean versions available
|
|
|
|
|
 |
Friction Hinges
: Egress Easy Clean Friction Hinge
Window Fittings » Friction Hinges
Manufacturer: Securistyle
- 12" and 16" Side hung friction hinge
- Allows vent to open to approx 90 degrees for exit
- Once open the vent can moved accross the frame for cleaning the exterior glass
- Suitable for Side opening vents upto 24 kg in weight max width 700mm
- 13mm , 16mm , 17mm stack height
|
|
|
|
|
 |
Friction Hinges
: Egress Friction Hinge
Window Fittings » Friction Hinges
Manufacturer: Avocet
- Egress Friction Hinge suitable for exiting window systems depending upon the area between frame for egressing
- Also available with Easy Clean facility
- Regulations for Fire Escape to BSS5588(1990) are:-
- 500mm min clear width x 850mm min clear height
- Window aperture being fitted between 600mm - 1100mm from finshed floor level on the room side
- Building Regulations Approved Document mB:1992 amended July2000 Section 2:11 Part A
- 450mm min clear width x 450mm min clear height with a minimum 0.33square metre area eg 0.33m2 at 450mm wide equals 0.734m high
- This covers ground and first floor applications
|
|
|
|
|
|
|
|
 |
Friction Hinges
: Standard Friction Hinge
Window Fittings » Friction Hinges
Manufacturer: Avocet
- Sizes 8" to 24" heavy duty top hung
- sizes 12" and 16" side hung
- Fitted with innovative new end cap < designed to ensure optimum weather seal in closed position
- Tested to 20,000 operations by UKAS Accredited Test Laboratory
|
|
|
|
|
 |
Friction Hinges
: Storm & Sterling Friction Hinge (Heavy Duty)
Window Fittings » Friction Hinges
Manufacturer: Securistyle
- Sterling Friction Hinges are designed for heavy duty
- Suitable for Commercial and Domestic windows and can carry vents 0.3m to 2m high , upto 100kg in weight
- Made from Austenitic ( 304 ) Stainless steel
- Sizes 10" to 26" top hung , 10" and 16" side hung
- 16" , 22" , 26" top hung available with or without adjustable fitting block for easier alignment of long narrow vents
- 10" and 16" side hung open to 90 deg for easy cleaning
- Storm are for heavy duty commercial work
- Available in 10" , 16" , 22" , 26" top and 10" , 16" side hung
- Suitable for vents 300 mm to 2000 mm.
- It is strongly recommended that large windows are restricted to opening angles of less than 45 degrees . Between 30 and 45 degrees the window will become self closing.It is recommended that between 30 and 45 degrees a separate restrictor is fitted
|
|
|
|
|
 |
Friction Hinges
: Vector & Vector Plus Friction Hinge
Window Fittings » Friction Hinges
Manufacturer: Securistyle
- Available from 8 inch to 24 inch top hung and 12 inch and16 inch side hung
- Metal end cap with spigot to give increased resistance against jemmy
- 13 , 16 , 17mm stack heights
- Restrictor versions available
|
|
|
|
|
 |
Friction Hinges
: Window Screws
Window Fittings » Friction Hinges
Manufacturer: Abrasives & Screw Products Ltd
- Flanged Countersunk Headed screws for Friction Stay Fitting
- Screws for PVCu applications
- Self Drilling and Needle point for reinforced and non reinforced profile
- Frame Fixing and Frame to Frame Screws
|
|
|
|